EN
PCB Terminal Progressive Stamping: Drawing, Plating and Inspection RFQ Guide
Responsum directum: a useful PCB-terminal RFQ should define the terminal geometry, PCB interface, 0.5 mm phosphor-bronze requirement, gold, silver or nickel finish, functional contact zones, critical dimensions, burr direction, inspection scope, quantity and delivery need before progressive-die tooling is released.
This page uses an actual family of stamped PCB terminals manufactured or supplied by Zhengna Technology. The confirmed family uses 0.5 mm phosphor bronze, progressive-die stamping and forming, and gold-, silver- or nickel-plated finishes. The photograph does not establish the exact dimensions, tolerance, plating thickness, electrical rating or inspection result of an individual part.
Confirmata producti probatio et RFQ-regulatae postulationes
| Res | Confirmed for this family | Still defined by the buyer |
|---|---|---|
| Utere | PCB connection terminals | Board location, mating interface, current path, and assembly method |
| Materia | 0.5 mm phosphor bronze | Exact grade, temper, and material documentation |
| Processus | Progressive-die stamping and forming | Strip layout, datum plan, bend radii, and tooling acceptance |
| Metam | Electroplating aurum, argentum aut nickelium intra familiam | Ordo stratorum, crassitudo, zonae, obturatio et evidentia acceptationis |
| Inspectio | Dimensions, diameter of hole, flatness, and appearance | Features critici, tolerantia, instrumenta, frequentia, acta et regula liberationis |
| Conditiones Commercii | Starting quantity of one piece, 30-day lead time, and pallet packaging | Quantitas finalis, programma, status utensilium et impachatio specifica pro destinatione |
Incipe ab interfacie PCB
Terminus non debet ex imagine catalogi tantum specificari. Nota in schemate modum connexiones: soldatur, inseritur, contactus elasticus, firmatur aut terram attingit. Indica quae superficies currentem portat, quae pars in tabula locatur, quae flexiones altitudinem contactus constituunt, et quae margines a filis, operatoribus aut componentibus coniungendis aversi esse debent.
Eadem forma visibilis aliter se potest gerere, si temperatus, directio granuli, radius flexionis, zona placata aut vis coniunctionis mutetur. Technologia Zhengna ideo examinat schemata edita et conditiones interfaciei antequam utensilia vel ambitum productionis confirmet.
Define Phosphor Bronze Beyond Thickness
The confirmed strip thickness for this photographed family is 0.5 mm phosphor bronze. The RFQ should still state the exact grade and temper. Those details affect forming strain, spring recovery, fatigue behaviour and dimensional stability. This page does not convert the material description into a universal spring force, cycle life or electrical rating.
Gold, Silver and Nickel Plating Need Separate Drawing Control
The supplied family includes gold-, silver- or nickel-plated configurations. These are finish choices within the family, not a statement that each part carries all three finishes simultaneously. The drawing should identify the base material, underplate where applicable, finish thickness, local or overall coverage, functional contact zones, masked areas and required evidence.
Nomen finitionis solus non probat soldabilitatem, resistentiam contactus, vitam corrosionis, praestantiam signali aut qualificatum automobilium. Si istae res important, specificatio projecti responsabilis debet nominare methodum experimenti et criterium acceptationis.
Caracteres Matricis Progressivae Ad Revidendum Ante Fabricationem
- directio fasciculi, positio portantis et orientatio partis;
- foramina perforata, fendas et relationem ad datums formandi;
- radios flexionis, altitudinem formatam et geometriam bracchii elastici, ubi applicabile;
- directionem burri in marginibus contactus, soldandi et coniunctionis;
- responsabilitatem plating-before-forming versus plating-after-forming;
- dimensiones criticas quae requirunt probationem primae partis, in-process vel finalis;
- orientationem impachationis quae impedit involutum, deformationem aut damnum finitionis.
Probatio Inspectionis Debet Nominare Caracterem
For this family, the confirmed checks cover dimensions, hole diameter, flatness and appearance. The inspection plan should connect each critical feature to its measurement method, sample size, frequency, acceptance limit and retained record. No functional or electrical-performance test has been confirmed for this family, so such testing must not be assumed.
Quotation Inputs
Provide a controlled CAD drawing with dimensions, hole and slot locations, tolerances, material grade and temper, finish requirements, purchase quantity and required timing. If no controlled drawing exists, Zhengna Technology can review a physical sample for measurement, but the parties must confirm nominal dimensions, tolerance authority, interface details and revision control before production release.
For the broader product family, review custom stamped electrical terminals et partes signationis custom to request a technical quotation review, contactus Technologiae Zhengna .
Quaestiones Frequenter Rogatae
Is 0.5 mm phosphor bronze confirmed?
Yes, for the photographed PCB-terminal family. The exact phosphor-bronze grade and temper still need to be stated in the drawing or quotation specification.
Does every terminal use gold, silver and nickel together?
No. The confirmed family includes gold-, silver- or nickel-plated configurations. The final finish, layer sequence, thickness and zones are controlled by the released drawing.
What inspections are confirmed?
Dimensions, hole diameter, flatness and appearance are confirmed inspection items. Equipment, frequency, numerical results and lot-acceptance status have not been supplied.
Potestne Zhengna Technology pretium offerre ex exemplari?
Yes. A sample can support measurement and feasibility review, but dimensions, tolerances, interfaces, finish and revision authority must be agreed before production.